800 tons mobile workbench hydraulic press 800T metal stretch forming four-column hydraulic press
This hydraulic press is customized according to the needs of Korean customers. The three-beam four-column hydraulic press is suitable for the pressing process of various plastic materials, such as stamping, bending, flanging, stretching, forming, blanking, bending of thin plates, etc. Can also be engaged in calibration, press fitting, grinding wheel forming
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
This machine is a custom-made one designed for an enterprise by our company.800 tonsMobile table hydraulic press，The work surface can be moved. The equipment isThree-beam four-column hydraulic pressIn addition to the common types of machines in the series, the company also designs and produces machines of various tonnages.Powder MoldingHydraulic press、frame type hydraulic press、Metal stretching hydraulic pressWait. Can be designed and produced according to user parameters, to ensure that the large table pressure uniform. Low noise, energy saving and environmental protection, can reduce power consumption, extend the service life of hydraulic press, reduce production costs
800吨移动大台面拉伸液压机机身
The hydraulic press uses galvanized sheet as the substrate, the worktable and slider are the whole 45# cast steel, the galvanized sheet is the substrate, and the high-quality environmentally friendly polyester baking paint is used as the topcoat.
800 tons of mobile large table stretching hydraulic press master cylinder
The cylinder of the machine is 45# steel, which is processed by forging to extend the service life of the machine.
800 tons mobile large table stretching hydraulic press hydraulic system
A large flow cartridge valve is adopted, and an oil suction filter is set at the oil inlet of the pump to prevent impurities from entering the hydraulic system to ensure the normal operation of the oil circuit. The system has oil temperature and oil level display, air filtration and other devices. The oil tank is of steel plate welded structure, and the bottom is equipped with screw plugs for oil drain and sewage discharge. Plug-in hydraulic special motor to reduce workshop noise.
800 tons of mobile large table stretching hydraulic machine electrical system
The machine is equipped with an independent electrical control box to centrally control the operation of the entire machine. The equipment is equipped with photoelectric protection device and emergency stop button to ensure the safety of personnel and equipment during operation.
800 ton mobile large table stretching hydraulic press operating system
PLC programming system is adopted to realize free switching between automatic and semi-automatic operation modes, which is convenient for equipment maintenance. The operating speed of the equipment and the pressure of the master cylinder can be adjusted arbitrarily. The process requirements of fixed range and pressure during production are met.
The stretching hydraulic press can be used for straightening, pressing, packing, pressing block and pressing plate, etc. It can also be used in the pressing process of shaft parts, the calibration, buckling and pressing process of profiles, and the pressing process of bending, shaping, embossing, sleeve, stretching and plastic materials of plate parts, such as stamping, bending, flanging thin stretching and other operations, and can also be engaged in the pressing and forming operations of correction, pressing, plastic products and powder products. Because of its wide range of applications is also known as universal tensile hydraulic press
1. High efficiency, low energy consumption, sensitive and reliable work
The second-stage speed of the movable beam of the 2.100-ton mobile large table stretching hydraulic press controls no-load high-speed and slow-speed die drawing. The upper and lower limit protection of the movable beam can be adjusted, and the stroke can be adjusted.
The 3.100-ton mobile large table stretching hydraulic press can be equipped with a safety protection grating device to protect the personal safety of workers in real time
4. The drawing force and pressing force can be adjusted within a certain range, and the effective stroke of the slider is adjustable
The electrical system of the 5.100-ton mobile large table stretching hydraulic press can be controlled by PLC or digital circuit according to customer requirements, and it is equipped with a display screen device.
6. The main hydraulic seals are selected from well-known brands to provide reliable guarantee for the sealing performance of the equipment
7, 100 tons of mobile large table stretching hydraulic press in order to meet the requirements of large workpiece processing technology, reduce labor intensity, convenient to lift the workpiece up and down, improve work efficiency
8. In order to meet the self-weight problem of the workpiece, the mobile worktable adopts a large bearing design, which is stable and reliable in operation. Load capacity can be adjusted according to the workbench
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
