100 tons of three-beam four-column customized hydraulic press 100t customized hydraulic press

Video Show

Introduction of hydraulic press

This machine is composed of two parts: the host and the control mechanism, which are connected by pipelines and electrical devices to form a whole. The host part includes the fuselage, the master cylinder, the limited range device, etc. The control mechanism includes hydraulic pump station (power system), electrical box, mobile console, etc. The structure and function of these parts are described as follows:

1. Fuselage

The main engine adopts a three-beam and four-column structure: it is composed of upper and lower beams, sliders, workbenches, columns, master cylinders, hydraulic power systems and electrical systems.

2. Master cylinder

The cylinder body of the master cylinder is fixed on the table. The lower end of the piston is connected with the sliding block by connecting flange and bolt,The material of the piston head is cast iron, for guidance. The piston head is pressed in the opposite direction.YX type seal ring, installed on the piston rodO-shaped sealing ring divides the cylinder into two oil chambers. The cylinder is equipped with a guide sleeve. The outer circle of the guide sleeve is equipped with an O-shaped sealing ring, which is locked by flanges and bolts to ensure the sealing of the cylinder port. On cylinder opening flangeEquipped with dust ring, To ensure the dustproof of the piston rod

3. Hydraulic station

The hydraulic pump consists of an oil tank, an axial piston pump, an electric motor, a two-way cartridge valve,Oil filter、Air filterComposition

The fuel tank isQ235 steel plate welding parts, the front end is equipped with a pressure gauge, in order to observe the pressure and adjust the pressure. A liquid level gauge is installed at the lower part of the pressure gauge bracket to observe the liquid level. The oil suction port of the oil pump is equippedoil suction filterTo ensure the cleanliness of the pump and hydraulic system. An air filter is installed on the panel of the fuel tank to filter the air

四柱液压机由主机及控制机构两大部分组成，通过管路及电气装置联系起来构成整体。主机部分包括机身、主缸、限程装置等。控制机构包括液压泵站（动力系统）、电器箱、移动操纵台等组成。三梁四柱液压机广泛适用于紧固件厂、汽车维修、五金行业、车件公司、矿业、电子元件、表带 Jewelry, lighting, lighting, mobile phone shell, pump industry, electrical equipment and other industries, three beam four column hydraulic press is widely used in many fields of mechanical industry, for example, in the field of forging (plastic processing), can be used for free forging, die forging, stamping(Sheet metal forming), extrusion, shearing, stretching, bending forming and superplastic forming and many other processes.

Technical parameters

pressing process

Suppression case