500 tons of automotive interior molding press molding press
A 500-ton double-cylinder hydraulic press customized by Shandong Zhongyou Heavy Industry for Shanxi customers is used to produce high-pressure equipment for molding and processing of automobile interiors (such as ceilings, door panels, seats, etc.), and efficient production is realized through hydraulic drive and precise control.
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
汽车内饰液压机是专为汽车内饰件（如顶蓬、门板、地毯、仪表盘板等）设计的成型设备，其核心功能是通过液压系统提供高压，将预处理的材料（如塑料、纤维复合材料）在模具中压制成型。其工作原理基于帕斯卡定律：
Hydraulic system: It is composed of hydraulic pump, hydraulic cylinder, hydraulic valve and pipeline. The hydraulic pump pressurizes the hydraulic oil and delivers it to the hydraulic cylinder to push the piston to move.
Pressure transmission: The pressure on the small-area piston is uniformly transmitted to the large-area piston through the liquid to realize the amplification of the force, thereby generating a huge pressing force.
Process flow: usually includes steps such as fast sliding, slow down, slow pressing, pressure holding, pressure relief, micro-return of sliding block, fast return, etc. to ensure that the material is fully fused and solidified.
Structure type and applicable scenario
four-post structure
Features: Three-beam and four-column design, simple structure, economical and practical, low cost. The fuselage is usually welded by all-steel CO₂, and the internal stress is eliminated by tempering vibration treatment to ensure long-term use without deformation.
Applicable scene: suitable for small and medium-sized production, such as canopy, carpet and other standard interior parts pressing molding.
Advantages: easy maintenance, flexible operation, suitable for cost-sensitive scenarios.
frame structure
Features: high fuselage strength, strong anti-partial load capacity, high stamping precision. Closed rail frame design, good rigidity, suitable for large table, high precision processing.
Applicable scenarios: suitable for high-standard interior parts (such as instrument panel, steering wheel) molding process, especially for high-strength areas (such as export, cold chain).
GEO-CANARY-86EA1707
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
