315 tons three-beam four-column hydraulic press 315T cold forming hydraulic press
This 315-ton four-column hydraulic press is customized for Pakistan's old customers. It adopts a three-beam four-column design structure and can be customized according to customer requirements. It has the advantages of high control accuracy, sensitive response and high quality of formed structural parts, and is mainly suitable for metal products.
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
315 tons three-beam four-column hydraulic press是山东滕州众友重工机械设备有限公司自主研发生产设计的，设备由主机及控制机构两大部分组成，通过管路及电气装置联系起来构成整体。主机部分包括机身、主缸、限程装置等。控制机构包括液压泵站（动力系统）、电器箱、移动操纵台等组成。Three-beam four-column hydraulic pressWidely used in fastener factory, automobile maintenance, hardware industry, car parts company, mining, electronic components, watchband, jewelry, lighting, lighting, mobile phone shell, pump industry, electrical equipment and other industries
Hydraulic press master cylinder
The cylinder of the machine is45#Steel, using forging after processing, extend the service life of the machine
Hydraulic system
A large flow cartridge valve is adopted, and an oil suction filter is arranged at the oil inlet of the pump to prevent impurities from entering the hydraulic system to ensure the normal operation of the oil circuit. The system has oil temperature and oil level display, air filtration and other devices. The oil tank is of steel plate welded structure, and the bottom is equipped with screw plugs for oil drain and sewage discharge. Plug-in hydraulic special motor to reduce workshop noise
Electrical system
The machine is equipped with an independent electrical control box to centrally control the operation of the entire machine. The equipment is equipped with photoelectric protection device and emergency stop button to ensure the safety of personnel and equipment during operation.
1、The fuselage is a four-column structure, and the stress parts are optimized for design, beautiful appearance and economical application.
2、The volume of the liquid filling tank is increased to ensure rapid liquid filling and reduce the pressure time. Increase the heat dissipation area and reduce the oil temperature
3、The modulus of the three beams of the host is large, which improves the rigidity of the three beams and greatly extends the life.
4、High-quality forgings for both master cylinder and piston rod for improved reliability
5、The surface of the piston rod and the column is quenched and plated with hard chromium to improve wear resistance and prevent surface corrosion and scratches.
6、Adopt advanced cartridge valve, compact structure, reduce the pipeline connection, improve the sealing of the system, reduce leakage
7、The power system adopts oil immersed vertical pump set. Reduce noise, good oil absorption effect, improve the life of the pump
8、The pressure gauge adopts a shock-resistant pressure gauge and is equipped with a pressure gauge section for easy maintenance.
9、The main cylinder seal adopts imported domestic preferred parts.
The stretching hydraulic press can be used for straightening, pressing, packing, pressing block and pressing plate, etc. It can also be used in the pressing process of shaft parts, the calibration, buckling and pressing process of profiles, and the pressing process of bending, shaping, embossing, sleeve, stretching and plastic materials of plate parts, such as stamping, bending, flanging thin stretching and other operations, and can also be engaged in the pressing and forming operations of correction, pressing, plastic products and powder products. Because of its wide range of applications is also known as universal tensile hydraulic press
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
