100 tons with protective net four-column hydraulic press 100T metal forming hydraulic press
This 100-ton hydraulic press with protective net is bought back by old customers in Taiyuan. The three-beam and four-column hydraulic press is suitable for pressing various plastic materials, such as stamping, bending, flanging, stretching, forming, blanking, bending, etc. Can also be engaged in grinding wheel molding, plastic products
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
100吨带防护网液压机是山东滕州众友重工机械设备有限公司自主研发生产设计的一款100 tons four-column hydraulic pressThe equipment is composed of two parts: the host and the control mechanism, which are connected by pipelines and electrical devices to form a whole. The host part includes the fuselage, the master cylinder, the limited range device, etc. The control mechanism includes hydraulic pump station (power system), electrical box, mobile console, etc. Widely used in fastener factory, automobile maintenance, hardware industry, car parts company, mining, electronic components, watchband, jewelry, lighting, lighting, mobile phone shell, pump industry, electrical equipment and other industries,Our company also designs and producesPowder forming hydraulic press、frame type hydraulic press、Metal stretching hydraulic pressWait. Can be designed and produced according to user parameters, to ensure that the large table pressure uniform. Low noise, energy saving and environmental protection, can reduce power consumption, extend the service life of the hydraulic press, and reduce production costs.
Hydraulic machine body
The galvanized sheet is used as the substrate, the worktable and slider are the whole 45# cast steel, the galvanized sheet is used as the substrate, and the high-quality environmentally friendly polyester baking varnish is used as the topcoat.
Hydraulic press master cylinder
The cylinder of the machine is 45# steel, which is processed by forging to extend the service life of the machine.
Hydraulic system of hydraulic press
The machine adopts a large flow cartridge valve, and an oil suction filter is arranged at the oil inlet of the pump to prevent impurities from entering the hydraulic system to ensure the normal operation of the oil circuit. The system has oil temperature, oil level display, air filter and other devices. The oil tank is of steel plate welded structure, and the bottom is equipped with screw plugs for oil drain and sewage discharge. Plug-in hydraulic special motor to reduce workshop noise.
Hydraulic machine electrical system
The machine is equipped with an independent electrical control box to centrally control the operation of the entire machine. The equipment is equipped with photoelectric protection device and emergency stop button to ensure the safety of personnel and equipment during operation.
hydraulic press operating system
The machine adopts PLC programming system to realize free switching of automatic and semi-automatic operation modes, which is convenient for equipment maintenance. The operating speed of the equipment and the pressure of the master cylinder can be adjusted at will. Meet the process requirements of fixed range and pressure during production.
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
