500t 2-beam 4-column hydraulic press 500T multifunctional hydraulic press disassembly, assembly, correction and forming lower top hydraulic press
The 500-ton two-beam four-column hydraulic press (multifunctional lower top type) is a hydraulic press with multiple functions and lower top design designed for foreign customers. It has the following characteristics: structural stability: the design of two beams and four columns makes the hydraulic press have higher stability and rigidity, and can withstand greater working pressure and impact. Versatility: The hydraulic press is suitable for a variety of process needs, including but not limited to press-fitting, calibration, stretching, stamping, etc. It can be adjusted and changed according to different process requirements to meet different production needs. Under the top type design: under the top type design makes the hydraulic press in the operation process more convenient and flexible. Through the pressure transmission of the lower top type, the deformation and molding process of the material can be better controlled, and the quality and accuracy of the product can be improved. High
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
500吨二梁四柱液压机（多功能下顶式）是为国外客户设计的一种具有多种功能和下顶式设计的液压机。
It has the following characteristics:
Structural stability: The design of two beams and four columns makes the hydraulic press have higher stability and rigidity, and can withstand greater working pressure and impact.
Versatility: The hydraulic press is suitable for a variety of process needs, including but not limited to press-fitting, calibration, stretching, stamping, etc. It can be adjusted and changed according to different process requirements to meet different production needs.
Under the top type design: under the top type design makes the hydraulic press in the operation process more convenient and flexible. Through the pressure transmission of the lower top type, the deformation and molding process of the material can be better controlled, and the quality and accuracy of the product can be improved.
High-precision control: The hydraulic press is equipped with an advanced control system that can achieve high-precision pressure and speed control. This helps to ensure the stability and consistency of the product during the molding process and improve the product qualification rate.
High safety: The safety factor is fully considered in the design and manufacturing process of the hydraulic press. It is equipped with a complete safety protection device and alarm system to ensure the safety of operators.
In practical applications, the 500-ton two-beam four-column hydraulic press (multi-functional lower top type) can be widely used in automobile manufacturing, aerospace, machinery manufacturing, metal products, plastic products and other industries. It can be used for pressing large gearbox gears and shafts, replacing reaction rod rubber assembly, correcting deformed workpieces and other technological processes.
GEO-CANARY-86EA1707
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
