800 tons hydraulic press stainless steel water tank plate stretch forming press 800t iron sheet forming stretch four-column hydraulic press

Video Show

Introduction of hydraulic press

The drawing and forming of stainless steel water tank plate is a processing technology completed by hydraulic press. Hydraulic press is a kind of mechanical equipment that uses liquid to transfer pressure. It can convert the energy of the liquid into mechanical energy and is used to realize the plastic deformation, stamping, bending, stretching and other processing processes of various metal materials.

不锈钢水箱板拉伸成型液压机的工作流程大致如下：

1 Material preparation: Prepare the stainless steel water tank plate material to be processed, and cut it into the corresponding size and shape according to the design requirements.

2 Mold selection: According to the shape of the water tank board to be made, select the appropriate stretch forming mold.

3 Adjust the parameters of the hydraulic press: according to the nature and forming requirements of the material, adjust the pressure and speed of the hydraulic press to ensure the stability and efficiency of the processing process.

4 Placement material: Place the stainless steel water tank plate on the mold to make it match the shape of the mold.

5 Hydraulic forming: Start the hydraulic press, the hydraulic cylinder starts to apply pressure, so that the stainless steel water tank plate is subjected to tensile force and gradually deforms to the shape of the mold.

6 Monitoring process: During the molding process, the operator needs to monitor the processing status to ensure the smooth progress of the molding process and avoid problems.

7 Check the finished product: After the molding is completed, take out the finished product, carry out quality inspection, and check whether its shape and size meet the requirements.

Subsequent processing: as needed, the finished product is further processed, such as welding, polishing, etc.

Technical parameters

pressing process

Suppression case