400 ton frame hydraulic press 400T hot forging forming oil press hot forging press

Video Show

Introduction of hydraulic press

400 tonsframe type hydraulic press是山东众友重工为上海企业定制生产的一款机器，机身采用框架式结构，主要由：上横梁、滑块、工作台、主缸、电气系统及液压系统等组成。设备由主机及控制机构两大部分组成，通过管路及电气装置联系起来构成整体。主机部分包括机身、主缸、限程装置等。控制机构包括液压泵站（动力系统）、电器箱、移动操纵台等组成。活动梁板二段速度控制：空载快速、慢速靠模拉深，提高产品的出产成功率，降低产品废品率，此外，我公司还可根据用户需求生产各吨位的Hydraulic press, you are welcome to inquire

1. The 400-ton frame hydraulic press adopts an all-steel structure, and the mechanical deformation is small after vibration aging treatment. The rack design has high rigidity and high precision through finite element analysis. The machine worktable can move up and down, the size of the expansion of the machine opening and closing height, the use of more convenient.
2. The working pressure, pressing speed and stroke range of this machine can be adjusted arbitrarily within the specified range as required. It can also complete the two process modes of upper pressure forming and fixed-range forming. In semi-automatic operation, both process modes have pressure holding delay after pressing and automatic return action.
3. The motor is efficient, energy-saving, low noise, low vibration, safe and reliable operation.
4. There is an emergency stop button. Press the emergency stop button and the press will stop immediately.
5. The oil pump inlet is equipped with a unique filter device to ensure the service life of the oil pump and valve.
6. This hydraulic press is a new product developed by our factory on the basis of continuous improvement by absorbing the advantages of similar products at home and abroad. The machine is a frame-type steel frame structure, using a single-piston double-acting cylinder.

Technical parameters

pressing process

Suppression case