500 tons stainless steel water tank plate hydraulic press 500T water tank cover plate forming press
The 500-ton stainless steel water tank plate hydraulic press is a special equipment specially used for producing various specifications of stainless steel water tank plates. Main function: mainly used in the production of various specifications of stainless steel water tank board, such as square water tank, chocolate splicing water tank, etc. Stainless steel water tanks of various sizes can be punched, or they can be directly punched into right-angle water tanks. Technical specifications: machine stroke: usually 500mm. Opening size: 800mm. Table size: 1300x 980mm. Lower top cylinder: 1600kn, stroke 300mm. Motor power: 22kW. Structural features: The equipment is a four-column structure, and the stress parts are optimized for design, beautiful appearance and economical application. The modulus of the end face of the three beams of the host is large, which improves the rigidity of the three beams and greatly extends the life.
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
The 500-ton stainless steel water tank plate hydraulic press is a special equipment specially used for producing various specifications of stainless steel water tank plates.
Main function: mainly used in the production of various specifications of stainless steel water tank board, such as square water tank, chocolate splicing water tank, etc.
Stainless steel water tanks of various sizes can be punched, or they can be directly punched into right-angle water tanks.
Technical specifications: machine stroke: usually 500mm.
Opening size: 800mm.
Table size: 1300x 980mm.
Lower top cylinder: 1600kn, stroke 300mm.
Motor power: 22kW.
Structural features: The equipment is a four-column structure, and the stress parts are optimized for design, beautiful appearance and economical application.
The modulus of the end face of the three beams of the host is large, which improves the rigidity of the three beams and greatly extends the life.
The master cylinder and piston rod are made of high quality forgings, which improves the reliability.
The volume of the liquid filling tank is increased to ensure rapid liquid filling and reduce the pressure time.
Scope of application: The equipment can be used to produce stainless steel water tank plates of different specifications on the market.
根据板材的厚度合理选择合适吨位的液压机，通常板厚在3个厚以内的选用400吨四柱液压机，超过三个厚则需要选用500吨四柱液压机。
Operation mode: there are three operation modes: manual, inching and automatic switching control. The operation mode is selected by the transfer switch, and the button is centralized control.
Safety Precautions: Those who do not understand the structural performance and operating procedures of the machine should not start the machine without authorization.
Mould shall not be overhauled or adjusted while the machine is working.
It is strictly prohibited to use with overload and partial load, and it is strictly prohibited to use the oil cylinder with overtravel and overpressure.
Price: The price varies due to factors such as the manufacturer, manufacturing process and supporting equipment, usually the price is around 125000~150000.
Supporting equipment: In addition to the 400-ton four-column hydraulic press, it also needs punching machines, shearing machines, bending machines, water tank molds, punching angle molds and other equipment to complete the entire production process of stainless steel water tank panels.
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
