1200 tons of building formwork forming hydraulic press 1200T building guardrail plastic formwork hot pressing press

Video Show

Introduction of hydraulic press

1200吨塑料建筑模板成型液压机为陕西客户定制

Overview of 1. equipment

The 1200-ton plastic building formwork forming hydraulic press is a large-scale equipment specially used for molding plastic building formwork. It adopts four-column structure, which has the characteristics of stability and reliability, large pressing force and high forming precision. The equipment applies pressure to the molding material through the mold to form and solidify it, thereby producing a plastic building template that meets the requirements.

2. features and advantages

高效性：1200吨液压机能够快速完成压制过程，提高生产效率。一次装料即可压制出成品，整个动作前后大约需要5分钟左右，大大缩短了生产周期。

High precision: The equipment adopts advanced control system and hydraulic technology, which can realize precise control of pressure and speed to ensure the dimensional accuracy and surface finish of the product.

Versatility: The hydraulic press is not only suitable for the pressing of plastic building templates, but also for the pressing process of other plastic materials, such as glass fiber reinforced plastic products, resin materials, powder products, etc.

Energy saving and environmental protection: some equipment adopts servo hydraulic system, which has the advantages of energy saving, high efficiency, low noise and less heat, which meets the requirements of environmental protection and energy saving in modern industrial production.

Easy to operate: The equipment is equipped with a PLC control system, which can realize one-key operation, and the operation is simple and convenient. At the same time, it also has a variety of operation modes such as adjustment, manual and semi-automatic to meet different production needs.

3. structure and composition

The 1200-ton plastic building formwork forming hydraulic press is mainly composed of two parts: the host part and the control mechanism.

Host part: including hydraulic cylinder, beam, column and liquid filling device, etc. The hydraulic cylinder is the key component that produces the pressing force, and the beam and the column play a supporting and fixing role. The liquid filling device is used to fill the hydraulic cylinder with hydraulic oil to realize pressure transmission.

Control mechanism: It is composed of fuel tank, high pressure pump, control system, motor, pressure valve, directional valve, etc. The control system is responsible for monitoring and controlling the operating status of the entire equipment, including the setting and adjustment of parameters such as temperature, pressure, and curing time.

4. working principle

The working principle of the 1200-ton plastic building formwork forming hydraulic press is mainly to apply pressure to the plastic raw materials in the mold through the hydraulic system to make it form and solidify in the mold. The specific process includes:

Feeding: Put the processed plastic raw materials into the mold to ensure that the raw materials are evenly distributed.

Mold clamping: start the equipment to close the mold, and at the same time, the hydraulic cylinder exerts pressure on the raw materials in the mold.

Heating and pressurizing: After the mold is closed, the raw material is heated and pressurized to melt and fill the cavity.

Holding pressure curing: keep for a period of time at the molding temperature to fully cure the thermosetting plastic.

Demoulding: after the plastic part is hardened and formed, the plastic part is taken out of the mold through the ejection device of the hydraulic press.

5. Market Applications

1200吨塑料建筑模板成型液压机在建筑模板生产领域具有广泛应用。随着建筑行业的不断发展，对模板的需求量也在不断增加。塑料建筑模板因其重量轻、强度高、耐腐蚀、易脱模等优点而受到市场的青睐。1200吨液压机的出现进一步提高了塑料建筑模板的生产效率和产品质量，满足了市场对高质量模板的需求。

Technical parameters

Suppression case