630 tons bait press 630T powder forming hydraulic press

Video Show

Introduction of hydraulic press

630 tonsfishing lure press hydraulic pressAlso known630T粉末成型液压机,采用三梁四柱式结构设计，山东滕州众友重工机械设备有限公司是专业的液压机生产厂家，可以根据市场需求和客户要求设计生产新型双色鱼饵压块机，一次可以根据客户需求压制多种数量鱼饵块，鱼饵块由多种原材料构成。根据产量和尺寸，分为200吨、315吨和400吨、500吨、630吨四柱油压机等多个型号。一台630吨自动进料鱼饵压块成型油压机可压制多种规格的鱼饵块，可通过更换模具的方式来完成，不需要购买多台设备。更多信息欢迎咨询我们

The lower oil cylinder of the mold moves upwards, and the distance of movement needs to be calculated based on the compression ratio of the raw materials. One fabric box starts working, filling the mold frame with materials and then retreating. The main oil cylinder slightly presses down on the bait and then goes up. The second fabric box starts working, filling the other type of material in the box and then retreating. The main oil cylinder quickly goes down to press and form, holding the pressure for a few seconds. The lower oil cylinder of the mold goes down to achieve the demolding of the bait block, and the pushing system works to push out the bait block. This process is completed in sequence, achieving continuous production


以下为630吨自动进料鱼饵压块成型油压机_630T粉末成型油压机机器特点：

1、油压机生产效率高，能耗低，运行平稳，操作简单

2、三梁四柱式结构，款式简单、经济、实用，框架式结构刚性好、精度高、抗偏载能力强

3、液压控制采用插装式基础系统，动作可靠，使用寿命长，液压冲击小，减少了连接管路与泄露点

4. The surface of the piston rod and the column is quenched and plated with hard chromium to improve the wear resistance and prevent surface corrosion and scratches.

5, the use of advanced cartridge valve, compact structure, reduce the pipeline connection, improve the sealing of the system, reduce leakage





630吨鱼饵压块成型油压机_630T粉末成型油压机是由主机、液压泵站和电气控制系统组成

主机：由机架、液压缸、磨具、配套模框和冲头等组成

Hydraulic pump station：由电机、液压阀、油路块，油泵、油管等组成

电器柜：由电气控制系统和为泵显示器组成

Technical parameters

pressing process

Suppression case