数控立车需求进行换油保养，因为它跟您的爱车一样，买回去今后一定要注意台面上的卫生，让灰尘和铁屑不能进入到轨道里边，进去今后产生的害处便是精度变差和手感变重，操作起来很重、吃力，所以数控立车就应该前期一个月换一次油，一年今后三个月换一次，头三个月一定要换三次。数控立车油换了，数控车床轨道的杂质也会削减，它会顺着新的油流入油槽里边，不会在轨道里边停留，就不会把轨道刮伤。
CNC vertical car maintenance "oil change" items are as follows:
1. Check the lubricating oil level to ensure the lubrication of the machine tool.
2. Check whether the coolant in the coolant tank is sufficient and cannot be increased in time.
3. Check the oil level height of the pneumatic tripiece, which is about 2/3 of the entire oil pipe height. The water and gas in the oil filter tank of the pneumatic triple unit shall be discharged through the drain switch every day.
4. Check the air pressure, relax the adjustment knob, adjust the pressure according to the principle of right-handed pressurization and left-handed decompression, which is generally set to 5-7kg/cm2. The pressure switch is generally set to 5kg/cm2. When it is lower than 5kg/cm2, the system will give an "LOWAIRPRESSURE" alarm. When the pressure rises, the alarm information will disappear.
5. Check whether the air blowing in the cone hole of the CNC vertical lathe spindle is normal, scrub the cone hole in the spindle with clean cotton cloth, and spray light oil.
GEO-CANARY-86EA1707