单臂液压机主要适用于金属制品拉伸、成型及压制等工艺，亦可加工非金属材料，粉末冶金制品的压制，轴类零件的校正，套类零件的压装以及金属制品的整形、切边等工艺。
single-arm hydraulic pressThe main contents of the operation and use precautions are:
The 1. shall not operate the machinery and equipment without understanding the structure, working performance and operating specifications of the equipment.
2. machinery and equipment in the work process, should not be repaired and adjust the mold, the maintenance of equipment operation is very dangerous.3. when the machine found serious oil leakage or other abnormalities (unreliable action, noise, vibration, etc.), should immediately stop, analyze the reasons, try to eliminate, never allow the disease into production.
4. fast single column hydraulic presses shall not be overloaded or used over a large eccentricity.
5., it is strictly prohibited to operate over the large stroke of the slider, and the closing height of the mold shall not be less than 600mm.
The grounding of electrical equipment of the 6. hydraulic press must be firm and reliable, and the grounding is not allowed to be connected to the electrical box by mistake.
7. the end of the day, the slider should be placed in a lower position.
The above is the single arm hydraulic press operation matters, we hope to help.
single-arm hydraulic pressThe main contents of the operation and use precautions are:
The 1. shall not operate the machinery and equipment without understanding the structure, working performance and operating specifications of the equipment.
2. machinery and equipment in the work process, should not be repaired and adjust the mold, the maintenance of equipment operation is very dangerous.3. when the machine found serious oil leakage or other abnormalities (unreliable action, noise, vibration, etc.), should immediately stop, analyze the reasons, try to eliminate, never allow the disease into production.
4. fast single column hydraulic presses shall not be overloaded or used over a large eccentricity.
5., it is strictly prohibited to operate over the large stroke of the slider, and the closing height of the mold shall not be less than 600mm.
The grounding of electrical equipment of the 6. hydraulic press must be firm and reliable, and the grounding is not allowed to be connected to the electrical box by mistake.
7. the end of the day, the slider should be placed in a lower position.
The above is the single arm hydraulic press operation matters, we hope to help.