在通常运转的315吨彩石金属瓦液压机设备中，其加工用途主要是以用液压泵输送液压油的静压进行工件的加工。加工制造型的企业使用的315吨彩石金属瓦液压机一般采用采用液压插装阀，因此，在生产工件时，经常会遇到液压动作不正常的情况。下面山东滕州众友重工液压机厂家小编为你进一步分析液压故障的主要原因。
First of all, the main reason for the failure of the 315-ton colored stone metal tile hydraulic press is that the main relief valve of the hydraulic system is seriously worn and produces garbage. The 315-ton colored stone metal tile hydraulic pressure will be stuck. If the flow of the hydraulic pump is abnormal, the flow and pressure of the hydraulic pump will cause anti-impact phenomenon. Because the punching valve on the upper part of the cylinder is not opened, there is a phenomenon that it cannot rise normally. When the directional valve of the lower chamber of the hydraulic system is fixed, the hydraulic oil enters the upper and lower systems. The spool blockage of the oil filling valve of the hydraulic system may be caused by debris or spring fracture.
Secondly, if the circuit of the 315-ton colored stone metal tile hydraulic press fails, the 315-ton colored stone metal tile hydraulic press may not work normally. It is recommended to use a screwdriver to check whether the two ends of the switching valve are stuck and test whether the rising small valve indicator is normal., Whether the hydraulic system moves in a balanced manner.
In addition, check whether the hydraulic pressure of the hydraulic system is within the normal range, and the bad result is to detect whether the cylinder of the 315-ton colored stone metal tile hydraulic machine is damaged.