400 tons double cylinder large table hydraulic press 400T metal forming oil press
The 400-ton double-cylinder hydraulic press is independently developed, produced and designed by Shandong Tengzhou Zhongyou Heavy Industry Machinery Equipment Co., Ltd., and is widely used in fastener factories, automobile maintenance, hardware industry, car parts companies, mining, electronic components, jewelry, lighting, lighting And other industries
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
400 tons double cylinder four column large table hydraulic press是山东滕州众友重工机械设备有限公司自主研发生产设计的，设备由主机及控制机构两大部分组成，通过管路及电气装置联系起来构成整体。主机部分包括机身、主缸、限程装置等。控制机构包括液压泵站（动力系统）、电器箱、移动操纵台等组成，Three-beam four-column hydraulic pressWidely used in fastener factories, automobile maintenance, hardware industry, car parts companies, mining, electronic components, watchbands, jewelry, lighting, lighting, mobile phonesShell, pump, electrical equipment and other industries, learn more about the machine details and prices,
Hydraulic machine body
The 400-ton double-cylinder, three-beam and four-column large table top hydraulic press uses galvanized sheet as the base plate, the worktable and slider are integral 45# cast steel, the galvanized sheet is the base plate, and high-quality environmentally friendly polyester baking paint is used as the topcoat.
Hydraulic press master cylinder
The oil cylinder of the 400-ton double-cylinder three-beam four-column large table hydraulic press is 45# steel, which is processed by forging to prolong the service life of the machine.
Hydraulic system
The 400-ton double-cylinder, three-beam and four-column large table hydraulic press adopts a large flow plug-in valve, and an oil suction filter is arranged at the oil inlet of the pump to prevent impurities from entering the hydraulic system to ensure the normal operation of the oil circuit. The system has oil temperature and oil level display, air filtration and other devices. The oil tank is of steel plate welded structure, and the bottom is equipped with screw plugs for oil drain and sewage discharge. Plug-in special hydraulic motor to reduce workshop noise.
Electrical system
The 400-ton double-cylinder three-beam four-column large table hydraulic machine is equipped with an independent electrical control box to centrally control the operation of the entire machine. The equipment is equipped with photoelectric protection device and emergency stop button to ensure the safety of personnel and equipment during operation.
Operating System
The 400-ton double-cylinder, three-beam and four-column large table hydraulic press adopts PLC programming system to realize free switching of automatic and semi-automatic operation modes, which is convenient for equipment maintenance. The operating speed of the equipment and the pressure of the master cylinder can be adjusted at will. Meet the technological requirements of fixed range and pressure during production.
Areas of use
The 400-ton double-cylinder, three-beam and four-column large table hydraulic press is suitable for pressing various plastic materials, such as stamping, bending, flanging, stretching, forming, blanking, bending, etc. Can also be engaged in correction, press, grinding wheel molding, plastic products and powder products pressing molding.
1. Auto parts; body covers, brake pads, fuel tanks, chassis, axle housings, bumpers.
2. Household appliances: washing machines, rice cookers, televisions, refrigerators, air conditioners and other parts.
3. Kitchen utensils: sinks, pots and other containers.
The way the product works
1. Inching: press the corresponding button to produce the corresponding action, release the action to stop
2. Manual: Press the corresponding button to produce the corresponding action until the limit position
3. Semi-automatic:(1) Fast descent of sliding beam controlled by constant pressure & rarr; Slow descent & rarr; Pressure holding delay after pressurization to the upper limit of electric contact pressure gauge DJ & rarr; Pressure relief & rarr; Return trip (then stop)
(2) fixed range control: sliding beam drops quickly & rarr; Slow drop & rarr; Pressurization When the sliding beam touches the proximity switch XK, the signal starts to maintain the pressure and delay & rarr; Pressure relief & rarr; Return (then stop) Features of hydraulic press: three-beam and four-column structure, economical and practical, hydraulic control adopts cartridge valve integrated system, reducing leakage points, reliable action and long service life, it can realize two kinds of forming process of constant pressure and fixed process, has the function of pressure holding delay, the working pressure stroke can be adjusted within the specified range, and the button centralized control can be used to realize manual, semi-automatic and automatic operation modes.
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
