315 tons two-beam four-column hydraulic press 315T multifunctional press
The 315-ton two-beam four-column hydraulic press is customized for foreign customers and has a wide range of applications. The 315-ton two-beam four-column hydraulic press, also known as the 315-ton two-beam four-column hydraulic press or press, is a common type of hydraulic press. The "315 tons" in its name refers to the nominal force of the equipment, that is, the maximum pressure that the equipment can exert. The equipment is mainly used to correct the deformation of the workpiece, disassemble cylindrical conical bearings, press fit all kinds of tight fitting parts and so on. It can also be applied to the pressing process of various plastic materials, such as stamping, bending, flanging, etc. The 315-ton two-beam four-column hydraulic press is mainly composed of two parts: the host and the hydraulic control system. The host includes an upper beam, a workbench, a hydraulic cylinder and a column. Among them, the upper beam and the workbench are connected to one by four columns.
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
315吨两梁四柱液压机为国外客户定制，具有广泛的应用范围。
The 315-ton two-beam four-column hydraulic press, also known as the 315-ton two-beam four-column hydraulic press or press, is a common type of hydraulic press. The "315 tons" in its name refers to the nominal force of the equipment, that is, the maximum pressure that the equipment can exert. The equipment is mainly used to correct the deformation of the workpiece, disassemble cylindrical conical bearings, press fit all kinds of tight fitting parts and so on. It can also be applied to the pressing process of various plastic materials, such as stamping, bending, flanging, etc.
The 315-ton two-beam four-column hydraulic press is mainly composed of two parts: the host and the hydraulic control system. The host includes an upper beam, a workbench, a hydraulic cylinder and a column. Among them, the upper beam and the worktable are connected together through four columns to form a stable four-column structure. The hydraulic cylinder is installed on the inner hole of the upper beam, and the pressure head is installed at the lower end of the cylinder piston rod to reciprocate up and down with the piston.
Strong bearing capacity: The four-column structure has high strength and stability, can withstand greater pressure and impact, and is suitable for processing and forming large workpieces.
High flatness: due to the rigidity of the four-column structure, the hydraulic press has high flatness and precision in the working process, which can ensure the quality and precision requirements of the finished product.
Easy to operate: hydraulic system control, the operation is relatively simple. By adjusting the pressure, speed and other parameters, it can flexibly meet the processing needs of different workpieces.
Versatility: suitable for the processing of a variety of materials, such as metal plates, plastic products, etc. It can carry out various process operations such as stamping, bending, stretching and pressing, and has a large application range.
High efficiency: The rapid response and action speed of the hydraulic system make the hydraulic press have high production efficiency, which can meet the demand of high-volume and high-speed production.
Preparation: Before use, confirm the safety status of the equipment, check the adequacy and quality of the hydraulic oil, and ensure that the machine is in normal working condition.
Adjust the position of the worktable: According to the size and processing requirements of the workpiece, adjust the position of the worktable to ensure that the workpiece can be correctly placed and fastened on the worktable.
Adjust the mold: select the appropriate mold according to the process requirements, and install it on the upper and lower molds of the equipment to ensure the stability and accurate alignment of the mold.
Setting process parameters: According to the characteristics of the workpiece and processing requirements, adjust the pressure, speed, stroke and other parameters in the hydraulic press control system to ensure stability and accuracy in the processing process.
Observe the processing effect: During the processing, the deformation and processing effect of the workpiece should be observed in time, and the process parameters should be adjusted as needed to ensure that the final output of the workpiece meets the requirements.
Complete operation: After completing the processing, stop the work of the equipment, remove the processed workpiece and proceed to the next step of processing or inspection.
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
