315T fan cover stretching machine 315 tons metal stretch forming hydraulic press

Video Show

Introduction of hydraulic press

Hydraulic press master cylinder
The oil cylinder of the machine is 45# steel, which is processed by forging to extend the service life of the machine

Hydraulic system
A large flow cartridge valve is adopted, and an oil suction filter is arranged at the oil inlet of the pump to prevent impurities from entering the hydraulic system to ensure the normal operation of the oil circuit. The system has oil temperature and oil level display, air filtration and other devices. The oil tank is of steel plate welded structure, and the bottom is equipped with screw plugs for oil drain and sewage discharge. Plug-in hydraulic special motor to reduce workshop noise

Electrical system
The machine is equipped with an independent electrical control box to centrally control the operation of the entire machine. The equipment is equipped with photoelectric protection device and emergency stop button to ensure the safety of personnel and equipment during operation.


315 tons fan coverTensile hydraulic press是山东滕州众友重工机械设备有限公司自主研发生产设计的，设备由主机及控制机构两大部分组成，通过管路及电气装置联系起来构成整体。主机部分包括机身、主缸、限程装置等。控制机构包括液压泵站（动力系统）、电器箱、移动操纵台等组成。根据匈牙利顾客参数需求生产制造。Is a professional for the fan cover press molding hydraulic press series. It has the characteristics of low energy consumption, low noise and low oil temperature. The main cylinder adopts a flangeless structure to improve the leak-proof performance; the main piston rod adopts high-hardness alloy steel to improve the wear resistance; the fuel tank and distribution box adopt a fully enclosed structure to improve the dust-proof performance; our company can produce each tonnage according to user demandMetal stretching hydraulic press、Powder forming hydraulic pressHydraulic press series

1. The fuselage is a four-column structure, and the stress parts are optimized for design, beautiful appearance and economical application.
2、The volume of the liquid filling tank is increased to ensure rapid liquid filling and reduce the pressure time. Increase the heat dissipation area and reduce the oil temperature
3、The modulus of the three beams of the host is large, which improves the rigidity of the three beams and greatly extends the life.
4、High-quality forgings for both master cylinder and piston rod for improved reliability
5、The surface of the piston rod and the column is quenched and plated with hard chromium to improve wear resistance and prevent surface corrosion and scratches.
6、Adopt advanced cartridge valve, compact structure, reduce the pipeline connection, improve the sealing of the system, reduce leakage
7、The power system adopts oil immersed vertical pump set. Reduce noise, good oil absorption effect, improve the life of the pump
8、The pressure gauge adopts a shock-resistant pressure gauge and is equipped with a pressure gauge section for easy maintenance.
9, the main cylinder seal adopts imported domestic preferred parts.

Technical parameters

Suppression case