500 tons of cattle and sheep licking brick hydraulic press powder forming hydraulic press 500T salt brick briquetting press 500 tons forming hydraulic press

Video Show

Introduction of hydraulic press

 This machine is one500T盐砖压块成型液压机，是由滕州众友重工机械有限公司自主设计生产的，Cattle and sheep brick licking hydraulic pressThe production method of the cattle and sheep nutrition licking bricks produced by the production equipment is: ingredients, mixing, pressing and forming, natural drying, and packaging as finished products. The ingredients are composed of salt, natural mineral lick brick additive and water. The natural mineral lick brick contains major elements such as calcium, phosphorus, sodium and chlorine, as well as trace elements such as iron, copper, manganese, zinc and selenium, which can maintain the electrolyte balance of ruminant livestock such as cattle and sheep, prevent mineral nutrition deficiency of livestock, and improve feed intake and feed utilization, it can be hung or placed on the trough or sink of ruminant livestock such as cattle and sheep, or on the rest of ruminant livestock such as cattle and sheep.

A place for free licking.

The cattle and sheep nutrition licking brick hydraulic press produced by our company is a kind of hydraulic briquetting machine equipment, which belongsPowder forming hydraulic pressOne, the pressure is large, can be formed at one time, the pressing density is large, and the appearance of the pressed product is smooth and beautiful. If customers want to produce products of different specifications, they can customize multiple sets of molds to achieve the goal of one machine with multiple uses. 

500 salt brick briquetting hydraulic pressThe fuselage adopts a three-beam and four-column structure. The upper beam and the workbench are combined into a fixed frame through the column, fastening nuts and adjusting nuts. The accuracy of the frame is adjusted by the adjusting nuts, which has good strength, rigidity and accuracy retention. At the same time, the upper beam, workbench, slider and other large parts are steel plate welding parts. After computer optimization design, its strength, rigidity, structure, anti-deformation, etc. all meet the standards and use requirements, and there is sufficient safety factor. Using carbon dioxide gas shielded welding and manual arc welding, the welding quality meets the requirements, and the internal stress is eliminated through physical vibration treatment.

 The 1.500T salt brick briquetting hydraulic press adopts a built-in fast sub-mother cylinder, which has fast air stroke speed, high production efficiency, low energy consumption, stable operation and simple operation;

2. Three-beam four-column structure, simple style, economical and practical, frame structure has good rigidity, high precision and strong anti-partial load capacity;

3. The hydraulic control adopts the plug-in basic system, which has reliable action, long service life, small hydraulic impact, and reduces the connection pipeline and leakage point;

The 4.500T salt brick briquetting hydraulic press can not only realize two stamping processes of fixed stroke and fixed pressure, but also realize three process working cycles of cushion, no cushion and ejection through the selection of operation panel;

5. The manual adjustment mechanism can adjust the pressure head or the upper workbench to press arbitrarily in the stroke, and can also adjust the length of the fast and working stroke arbitrarily within the design stroke;

6. Pressure, stroke, holding pressure, etc. can be adjusted according to the requirements of the pressing process, using imported hydraulic, electrical components and seals, durable;

7. Two-handed operation, with emergency stop and inch function, optional infrared photoelectric hand protection device, improve safety production efficiency

GEO-CANARY-86EA1707

pressing process

Suppression case

Pressing process