315 tons color stone metal forming hydraulic press 315T double cylinder four column hydraulic press hydraulic press production line customization
The 315-ton colored stone metal forming hydraulic press has a customized structure for foreign customers: it adopts a double-cylinder four-column design, which is simple in structure but economical and practical. The I-frame structure has good structural steel performance, high precision and strong load resistance. Hydraulic control: Adopt the whole cartridge valve group system, reduce the leakage point, reliable action and long service life. Electrical system: PLC control, compact, sensitive, reliable and flexible. Adjustability: The working pressure and stroke can be adjusted within the specified range according to the process requirements, and the operation is simple. Operation mode: including adjustment, two-hand unit cycle, continuous work (with feeding device) three. Process operation cycle: through the operation panel selection, to achieve fixed stroke, constant pressure two molding process, as well as buffer, no buffer, top out three process operation cycle.
Scan code plus WeChat
+86 13562463338
+86 13562463338
Video Show
Introduction of hydraulic press
315吨彩石金属成型液压机为国外客户定制
Structure: The double-cylinder four-column design is simple but economical and practical. The I-frame structure has good structural steel performance, high precision and strong load resistance.
Hydraulic control: Adopt the whole cartridge valve group system, reduce the leakage point, reliable action and long service life.
Electrical system: PLC control, compact, sensitive, reliable and flexible.
Adjustability: The working pressure and stroke can be adjusted within the specified range according to the process requirements, and the operation is simple.
Operation mode: including adjustment, two-hand unit cycle, continuous work (with feeding device) three.
Process operation cycle: through the operation panel selection, to achieve fixed stroke, constant pressure two molding process, as well as buffer, no buffer, top out three process operation cycle.
Instructions for use: oil tank maintenance: clean once every six months, and replace the new oil, use 32~46# anti-wear hydraulic oil.
Requirements for oil use: it must be strictly filtered and then injected into the oil tank. The oil level cannot be lower than the indicating line of the oil mark. The oil temperature should be within the range of 15 ℃ ~ 60 ℃.
Pressure gauge test: need to identify once every six months.
Long-term use: all exposed surfaces should be scrubbed clean and coated with anti-rust oil.
Price range: according to different suppliers and custom needs, the price varies.
定制服务：我们众友重工提供315吨彩石金属瓦成型液压机的定制生产线服务。
Production line configuration: A complete production line including raw material processing, molding, curing, packaging, etc. can be customized according to customer needs.
Price: The price of the customized production line depends on the equipment configured and the complexity of the production line. The price range is wide and needs to be quoted according to specific needs.
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
Technical parameters
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 100T-A | 100T-B | 160T | 200T-A | 200T-B | 315T-A | 315T-B |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 500 | 600 | 600 | 700 | 600 | 800 | 600 |
| Opening height mm | 800 | 900 | 900 | 1200 | 900 | 1250 | 1000 |
| Effective area of workbench | 630*550 | 750*700 | 660*600 | 1000*1000 | 800*800 | 1260*1160 | 800*800 |
| Idle descent speed mm/s | 100 | 100 | 100 | 100 | 100 | 120 | 120 |
| Pressing speed mm/s | 7-15 | 7-15 | 7-15 | 7-18 | 7-18 | 7-12 | 7-12 |
| Return speed mm/s | 90 | 90 | 90 | 90 | 90 | 100 | 90 |
| Motor power KW | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 22 | 15 |
| Jacking force KN | 200 | 200 | 400 | 400 | 400 | 630 | 630 |
| Ejecting stroke mm | 200 | 200 | 200 | 200 | 200 | 300 | 300 |
| YQ32 series three-beam four-column hydraulic press | |||||||
| project | 400T | 500T | 630t | 800T | 1000T | 1250t | 1600t |
| Liquid pressure Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Effective stroke of slider mm | 800 | 900 | 900 | 1000 | 900 | 900 | 1000 |
| Maximum opening height mm | 1250 | 1500 | 1500 | 1800 | 1600 | 1600 | 1800 |
| Effective area of workbench | 1260*1160 | 1400*1400 | 1600*1600 | 1500*1500 | 1500*1500 | 1800*1600 | 1600*1600 |
| Idle descent speed mm/s | 100 | 150 | 150 | 180 | 180 | 160 | 180 |
| Pressing speed mm/s | 5-11 | 10-18 | 9-18 | 9-18 | 10-18 | 10-18 | 6-14 |
| Return speed mm/s | 100 | 120 | 150 | 180 | 220 | 200 | 220 |
| Motor power KW | 45 | 45 | 45 | 37*2 | 37*2 | 37*2 | 37*2 |
| Jacking force KN | 630 | 1000 | 1000 | 1000 | 1000 | 1000 | 1600 |
| Ejecting stroke mm | 300 | 300 | 300 | 300 | 300 | 300 | 350 |
pressing process
Suppression case
