The rubber slag retaining plate of railway bridge tunnel is also called rubber bridge walking plate, which is equipped with steel skeleton, which has strong bearing capacity, is not easy to deform, and is stable and anti-seismic and anti-skid. It is the large-scale railway lines that are being fully built in our country. There is a harmony number set up for us on the track. Under the track, there is a rubber walking board supplied for you by Yucai Rubber Factory in Sanmen County, so that you can travel safely and go home happily.
桥梁轻质橡胶步行板以天然橡胶为主要原料，内设螺纹钢骨架，经高温高压压制而成，表面采用凹凸花纹设置，是替代钢筋混凝土步行板的理想产品。热模压成型橡胶桥梁步行板需要选用合适结构吨位的液压机，称为315吨铁路桥梁轻质橡胶步行板模压成型液压机，该设备采用三梁四柱式双缸结构设计，采用四柱式结构，活动板与工作面平行精度高，四个导套使下压垂直精度高；油缸采用可调式；上压板移动机构由油缸、直线轴承、4立柱导杆、模具、模具等部件组成。
Features of 315 ton railway bridge lightweight rubber walking board molding hydraulic press:
1) The 315-ton railway bridge lightweight rubber walking board molding hydraulic press adopts four-column three-plate, upper and lower board heating control, with a large output of 315 tons, a stroke of 800MM, an adjustable stroke of 1000MM, a working height of 700MM, and a working area of 1000*1000MM.
2) The hydraulic system adopts time control, and the output can be adjusted according to the product needs.
3) The 315-ton railway bridge light rubber walking board molding hydraulic press is a two-hand start button, equipped with an emergency button and an upper and lower die inching operation button, which is convenient for mold installation and correction.
4) The 315-ton railway bridge lightweight rubber walking board compression molding hydraulic press is divided into two operations: manual/automatic. Start the machine: press the up and down buttons in the manual state, and the machine can move up and down to test the product pressure to meet the product requirements. In the automatic state, press the start button with both hands to press down the machine quickly, press down until the product reaches the set time, the machine quickly picks up and then stops, and the action is completed in one week.
热模压成型铁路桥梁轻质橡胶步行板除了315吨液压机外，公司可根据产品的特点，量身打造合适的桥梁轻质橡胶步行板，400吨、500吨、630吨、800吨等四柱油压机或框架式油压机等。设备多采用四柱三板型结构，四柱精密导套控制，活动板与工作台面平行精度和垂直精度极高；上下工作面装有热处理后的发热板，开有通用的T型曹固定的模具，采用智能温控器PID控制，精度高，温度误差小。工艺调整简便：压力、行程、速度、保压时间、闭合高度均可根据生产工艺任意调整，操作简便。采购了解315吨铁路桥梁轻质橡胶步行板模压成型液压机设备，可咨询公司Manager Zhang: 13562463338 (WeChat can be added)