四柱拉伸油压机使用一段时间后，都要对油缸进行清洗，不仅可避免杂质对活塞杆造成损坏，还能提高密封件的密封性，为了避免对油缸重要部件产生损坏，
我们来介绍下四柱液压机油缸在清洗过程中应该注意哪些事项?
1. Cleaning needs to disassemble the oil cylinder. During the disassembly process, care should be taken not to damage the piston rod and seals, and place them in a clean place;
2, do not use cotton, hemp, silk and chemical fiber fabric to wipe, to prevent the shedding of fiber pollution system;
3. Parts that have been cleaned but not assembled for the time being should be stored in anti-rust oil to prevent dust pollution and rust;
4. Disassembly and assembly and cleaning of the oil pressure parts of the oil cylinder should be carried out in a clean room that meets the standards. If there are conditions, the operation room can be pressurized to make the indoor pressure higher than the outdoor pressure to prevent atmospheric dust pollution;
5. Check whether the seal and piston rod are damaged, check the possible hidden dangers, and replace or repair them;
6. After cleaning to ensure that the cleanliness of the hydraulic oil reaches the standard, it can be used normally after entering the equipment commissioning and operation stage;
7. After all parts are cleaned and qualified, assemble them in sequence;
8、安装好后不要立刻安装到四柱液压机上，应经过简单测试，没有问题后才能装配到设备上。
GEO-CANARY-86EA1707