框式液压机不需要特色地基，当液压机就位之后，只需要把液压机底部垫平，把工作此校正水平就可以了，过程很简单，通常安装就位之后，需要通知液压机厂家专业调试人员来进行升缸调式，如果用户自行调试的话，应该做好如下工作，现在简单介绍下龙门液压机厂家升缸的过程以及需要注意的地方，仅供大家参考。
1. When lifting the main cylinder of the gantry hydraulic press, the main cylinder of the hydraulic press should be lifted in place by a jack, and then fixed firmly with bolts.
框式液压机
2. After installing the main oil cylinder of the hydraulic press, fix the filling oil tank and connect the inlet and outlet oil pipes of the filling valve with bolts.
3. After the main oil cylinder of the hydraulic press and the filled oil tank are in place, connect each oil pipe according to the label number on each hydraulic oil pipe and the oil pipe connector.
4. Carefully check whether each connection position of the gantry hydraulic press and the hydraulic oil pipes have been firmly connected. Only after all are correct can the next test run be carried out.