In the use of the hydraulic cylinder to control the speed properly, not more than 2 m/s, which can extend the service life of the hydraulic cylinder, the following to tell you about the five basic points of maintenance:
1. Pay attention to check whether the tight firmware is loose, and keep checking at all times to avoid loose state.
2. Clean the oil, because the dirt in the oil will damage the parts of the system.
3, keep the amount of oil, less oil will enter the air, so that the hydraulic cylinder system is not running properly.
4. Pay attention to check the oil leakage. The oil leakage indicates that there is a problem with the seal and replace it in time. In this case, it not only costs oil, but also reduces the power, and seriously the system operation stops.
5. Be familiar with the sound of the hydraulic system of the hydraulic cylinder. The sound of normal operation is different from that of abnormal operation. Hearing abnormal sound indicates that there is a fault. Scan in time to avoid large damage to small hair lesions and great impact.
GEO-CANARY-86EA1707