What are the process actions of Tengzhou head cold forming hydraulic press?
Head cold forming hydraulic pressIt is a stretching equipment specializing in the production of various heads. Its working pressure, pressing speed, and stroke can be adjusted within the specified parameters according to process needs. Tengzhou head cold forming hydraulic press is a relatively high cost of domestic molding equipment, the cold forming process action is as follows:
Cold-pressing forming part of head
Initial position of head hydraulic press; The stretching slider and the holder slider descend quickly together & rarr; The holder slider descends quickly separately & rarr; The holder slider pressurizes & rarr; The stretching slider stretches the workpiece downward; The pressure holding delay and pressure release Stretching slider The holder slider returns and the lifting rotating device jacking the workpiece (after the workpiece is removed) and the lifting rotating device returns. The ejection starting time of the jack-up rotary device can be excited by the position set in the return stroke of the slider to increase the working frequency.
Below to understand the head of the cold forming hydraulic press applicable environment:
1. Temperature of equipment working area:-10~60 ℃(±)
2. Power supply: three-phase four-wire 380V, 50HZ, voltage fluctuation range 380V ± 10%
3. Cooling mode: water cooling device
4. Medium used in hydraulic system: No. 46 anti-wear hydraulic oil.
滕州封头冷压成形液压机总公称力范围为6300kN～60000kN，其主机的开口高度、滑块行程、工作台面、拉伸压边力等可根据用户需求和压制工艺的需要来确定。山东众友重工机床有限公司专业设计生产各种封头压制设备，工期短交货快，部分吨位封头冷压成形机有现货，欢迎广大用户来公司实地考察试机。
GEO-CANARY-86EA1707