1. Keep the hydraulic oil clean before use. Hydraulic oil in the transport and storage process will be contaminated by the outside world, the newly bought hydraulic oil looks very clean, in fact, very dirty, must be put a few days later, after filtering into the hydraulic system.
2. Keep the hydraulic system clean after assembly and before operation. Hydraulic components must be cleaned during processing and assembly. The hydraulic system should be thoroughly cleaned after assembly and before operation, and the oil used in the system should be used for cleaning. During cleaning, the oil tank must be completely sealed except for the vent hole, and the seal must not have flash or burr.
如何防止门面压花机油液被污染？
3. Keep the hydraulic oil clean during work. The hydraulic oil will be polluted by the environment during the working process. Therefore, try to prevent air and moisture from being immersed. In order to completely eliminate the immersion of water, gas and pollutants, seal the oil tank and add air filter on the vent hole.
4. Take the appropriate oil filter. This is an important means to control the pollution of hydraulic oil. According to the requirements of the equipment, different filtering methods, different precision and different structure oil filters should be selected in the hydraulic system, and the oil filter and oil tank should be checked and cleaned regularly.
5. Replace the hydraulic oil regularly. Before replacing the new oil, the oil tank must be cleaned once. When the system is dirty, it can be cleaned with kerosene and drained such as new oil.