13562463338
牛羊舔砖液压机将各种营养成分按照一定比例混合的原材料，通过强大的压力加工成坚固、密度均匀的舔砖形状，以满足牛羊等牲畜在生长过程中对矿物质、维生素等营养物质的补充需求，主要依据帕斯卡定律，利用液体压力来传递能量，电机驱动液压泵将液压油加压，产生的高压油进入液压缸，推动活塞运动，从而对模具中的舔砖原材料施加巨大的压力，使原材料在模具内被压缩成型。
The maximum pressure that the hydraulic press can output stably can flexibly adjust the pressing pressure within a certain range according to different raw materials and licking brick specifications, usually 20% - 100 of the rated pressure; The speed of the mold approaching the raw material quickly under no-load condition is generally about 50 - 150 mm/s, which can shorten the working cycle and improve the production efficiency. The speed at which the mold presses the raw materials is usually 5 - 20 mm/s, this speed can ensure that the raw material is uniformly deformed under pressure.
The cattle and sheep licking brick hydraulic press mainly adopts a four-beam four-column hydraulic press structure, which realizes pressure transmission and mold pressing through the hydraulic transmission system. The equipment has a built-in PLC programmable controller, which can automatically complete the whole process of cloth, pressing, demoulding, and pushing blocks, reducing labor intensity and improving production efficiency.
Cattle and sheep licking brick hydraulic press is widely used in animal husbandry, such as cattle and sheep and other livestock breeding, can be minerals, vitamins and other trace elements and nutrients scientific formula, directly pressed into block or cake licking brick, for cattle and sheep lick to supplement the required nutrition. This kind of licking brick is not only convenient for livestock to eat, but also can improve the utilization rate and nutritional value of feed.
Common 315 tons, 400 tons, 500 tons, 630 tons, 800 tons, 1000 tons, etc., different tonnage of equipment has different pressing capacity and scope of application. For example, a 630-ton hydraulic press can press two five-kilogram licking bricks at a time, while a 1000-ton hydraulic press can press larger licking bricks. Users can choose the appropriate model and specifications according to actual needs and production scale.
The four-beam and four-column structure is a common structure in hydraulic presses. It is mainly composed of an upper beam, a lower beam, two left and right columns and the connectors between them. The upper beam is located at the top of the equipment to support and fix the upper mold. The lower beam is located at the bottom of the equipment to support the workbench and the lower mold. The left and right columns are vertically arranged between the upper beam and the lower beam to connect and support, the upper beam, the lower beam and the column are closely connected together by connecting members (such as bolts, nuts, etc.) to form a stable overall structure.
The four-beam and four-column structure can withstand greater pressure, has high pressing accuracy, and can maintain a high degree of stability during the manufacturing process. The four-beam and four-column structure has high rigidity and can effectively resist external interference and vibration. The cattle and sheep lick brick hydraulic press with the four-column structure of the beam can adapt to the production requirements of lick bricks of different specifications and shapes.
Raw materials usually include sugar, honey (accounting for 30% ~ 40%), bran (accounting for 25% ~ 40%), urea (accounting for 7% ~ 15%), Portland cement (accounting for 5% ~ 15%), salt (accounting for 1% ~ 2.5), mineral element additives (such as bone meal, etc, 1% to 1.5) and the right amount of vitamins. These raw materials are mixed according to a certain proportion to ensure the nutritional balance of the licking brick.
Put the mixed raw materials into the mixer and mix them fully to ensure that the various ingredients are evenly mixed to form the raw materials of the licking brick.
The mixed material is transported to the silo of the hydraulic press through the automatic feeding device. The material in the silo is evenly laid in the mold under the control of the automatic cloth system. The punch of the hydraulic press is driven by the hydraulic system. Quickly press down to the set position and press strongly to form a dense lick brick shape. In order to achieve better pressing effect, double-action pressure will be carried out to improve the density and strength of the lick brick, ensure that it is not easy to break during use. After the pressing is completed, the floating plate will be pressed down under the control of the hydraulic system to push the formed licking brick out of the mold.
The optimized hydraulic transmission scheme is adopted, and the full automation degree is high, which can realize the functions of automatic cloth, automatic pressing, automatic demoulding, automatic pushing block and so on.
山东众友重工设计生产的液压机从零部件直到成品出厂，都逐一经过严格的控制与检验。雄厚的实力，的技术设备，完善的检测手段，务实的工作作风，以及优秀的全程管理，构建了公司产品的优良品质
The high-pressure press of the cattle and sheep licking brick hydraulic press ensures that the licking brick has a tight structure and is not easy to crack. It is welded with high-quality steel and undergoes strict heat treatment to ensure a stable structure.